User Tools

Site Tools


33c3:virtual_beach

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
33c3:virtual_beach [2016/12/03 15:50] – [Details] Ed Watson33c3:virtual_beach [2018/07/06 09:53] (current) – external edit 127.0.0.1
Line 12: Line 12:
 ===== Details ===== ===== Details =====
  
-The minimum approx area needed for the basic setup is 5m x 5m. A corner position is preferred. Power is required for 1x 50watt and 2x 20watt RGB LED spotlights, in addition to a 65watt LED projector and a small freestanding fan. Misc sundries include a networked Pi running info-beamer and the odd 5v LED strips.+The minimum approx area needed for the basic setup is 3m 3m (inc a 0.5m clearance perimeter). A corner position is preferred. Power is required for 1x 50watt and 4x 20watt RGB LED spotlights, in addition to a 65watt LED projector and a small freestanding fan. Misc sundries include a networked Pi running info-beamer and the odd 5v LED strips.
  
 The area will be covered by a soft beige fleece floor material, weighted at points. Beach inflatables and accessories will populate the ground space as sitting pillows intended as restful beach-style lounging for consulate members and all visitors. Note: it is not intended to replace consulate table and chair seating, only to provide respite from it for anyone to enjoy with laptop. The area will be covered by a soft beige fleece floor material, weighted at points. Beach inflatables and accessories will populate the ground space as sitting pillows intended as restful beach-style lounging for consulate members and all visitors. Note: it is not intended to replace consulate table and chair seating, only to provide respite from it for anyone to enjoy with laptop.
Line 18: Line 18:
 Two of the four open sides to the area will be draped with semi opaque garden-fleece material to be used as a projection surface for the LED Projector and controlled LED RGB Spots. Projected beach scenes, colours, sounds and fanned beach scents will be emitted from a central freestanding 2m weighted column housing the lighting hardware and supporting the high-corner of the drape material. Two of the four open sides to the area will be draped with semi opaque garden-fleece material to be used as a projection surface for the LED Projector and controlled LED RGB Spots. Projected beach scenes, colours, sounds and fanned beach scents will be emitted from a central freestanding 2m weighted column housing the lighting hardware and supporting the high-corner of the drape material.
  
-If additional space exists surrounding the edges, towels/inflatables can be added to the floor area for additional lounge space. A fake mini-firepit with moving flame material and animated fire effects will be added, resources permitting.+If additional space exists surrounding the edges, towels/inflatables can be added to the floor area for additional lounge space. 
  
-{{:33c3:virtual_beach_v3.png|}} +A fake mini-firepit with moving flame material and animated fire effects will be added. This will house the mini-projector and PI, to project onto the facing side-sheet of a portable hammock. 
-Prototype Layout v3+ 
 +{{:33c3:virtual_beach_v6.png|}} 
 +Prototype Layout v4
  
 The freestanding 2m column that houses the lighting hardware will be constructed from either: The freestanding 2m column that houses the lighting hardware will be constructed from either:
Line 27: Line 29:
   - A freestanding fan stand with additional base stabilisation   - A freestanding fan stand with additional base stabilisation
  
-There are plans to control the kit via NQTT (ideally). The projected ocean tides, along with other AV media will be displayed via infobeamer and controlled via NQTT commands. The LED floods *may* also be 3-channel NQTT controllable via added NodeMCUs (in development), otherwise controlled via emulated IR else IR remote.+There are plans to control the kit via MQTT (ideally) to simulate different beach conditions. The projected ocean tides, along with other AV media will be displayed via infobeamer and controlled via MQTT commands. The LED floods *may* also be 3-channel MQTT controllable via added NodeMCUs (in development), otherwise controlled via emulated IR else IR remote.
33c3/virtual_beach.1480780220.txt.gz · Last modified: 2018/07/06 09:53 (external edit)